20. TROUBLESHOOTING GUIDE
20.1 The Braille Sense U2 MINI Will Not Turn On
20.2 The Voice Cannot Be Heard
20.3 The Voice is Too Fast to Understand
20.4 The Voice Pitch Is Too Low or Too High to Understand
20.5 You Don't Know Where You Are
20.6 No Internet Connection
20.7 Email
20.8 The Braille display Does Not Display Braille
20.9 The Braille Sense U2 MINI Does Not Respond

20. Troubleshooting Guide
If you are encountering problems with the Braille Sense U2 MINI, please take a look at the following suggestions for solving many common problems: 

20.1 The Braille Sense U2 MINI Will Not Turn On
1. Check to make sure that the battery is inserted in to its compartment properly.
2. If the battery is inserted properly, connect the AC adapter, and plug the AC adapter in to an electrical outlet. The battery may need to be charged.
3. Or, Check the location of the keyboard lock switch. If this switch is placed in the "lock" position, the power switch is not functional.

20.2 The Voice Cannot Be Heard
1. Make sure the volume is loud enough to be heard. Press "backspace-F 4" to raise the volume.
2. Make sure the voice is turned on. Press "Backspace-F2" to toggle the voice on/off.

20.3 The Voice is Too Fast to Understand
1. Press "space-F1" to lower the voice rate.

20.4 The Voice Pitch Is Too Low or Too High to Understand
1. Press "enter-F1" to lower the pitch, or press "enter-F 4" to raise the pitch of the voice.

20.5 You Don't Know Where You Are
1. If you have become disoriented as to your location on the Braille Sense U2 MINI, and cannot remember where you are, press "F1" to access the "program" menu. Then, press "F2-F3" to switch among the open programs. If you are in the Word Processor, pressing "space1-5-6" gives you your current location in the open document.

20.6 No Internet Connection
Ensure wireless is turned on. Use "Backspace-dots-1-4-5-6" to toggle wireless on/off. 

20.7 Email
1. If you are having trouble downloading email, please contact your Internet service provider to make sure that you have the correct POP3 and SMTP settings.
2. If you cannot send or receive mail, make sure you have an active connection to the Internet.

20.8 The Braille display Does Not Display Braille
1. If the Braille display does not display Braille, make sure that the Braille display is turned on. Use "Backspace-F3" to toggle the Braille display on/off.

20.9 The Braille Sense U2 MINI Does Not Respond
1. If the Braille Sense U2 MINI does not respond to keystrokes or commands, it may be necessary to reset the unit. To reset the Braille Sense U2 MINI, press the reset button on the rear panel, or press "1-2-3-4-5-6-F2-F3." Do NOT hold the reset button for more than 5 seconds.
2. If pressing the "Reset" button does not revive the Braille Sense U2 MINI, you may need to perform a hard reset. Press and hold the "Forward" button on the front media panel. (This button is the right-most button in the media group and looks like a right arrow.) While holding "Forward", quickly press and release the "Reset" button. Continue to hold the "Forward" button until the unit revives (this should occur within 30 to 45 seconds). 

